Amazone Catros 2503 Special Скачать руководство пользователя страница 57

Страница: 57 / 70

Transportation

•

On transportation journeys, follow the instructions given in the
section "Safety instructions for the operator", page 22.

•

Before moving off, check:

that the supply lines are connected correctly.

the lighting system for damage, function and cleanliness.

WARNING

Risk of being crushed, cut, caught, drawn in or struck if the ma-
chine is unintentionally released from its attached or hitched
position.

Before transportation, carry out a visual check that the upper and
lower link pins are secured with a lynch pin against unintentional re-
lease.

WARNING

Risk of contusions, cuts, dragging, catching or knocks from
tipping and insufficient stability.

•

Drive in such a way that you always have full control over the
tractor with the attached machine.

In so doing, take your personal abilities into account, as well as

the road, traffic, visibility and weather conditions, the driving
characteristics of the tractor and the connected machine.

•

Before transportation, fasten the side locking of the tractor lower
link, so that the connected or coupled machine cannot swing
back and forth.

WARNING

Risk of falling from the machine if riding against regulations!

It is forbidden to ride on the machine and/or climb the running ma-
chine.

Catros BAG0160.4 02.19

Содержание Catros 2503 Special







































































Результаты поиска

Содержание Catros 2503 Special

Отзывы:

Бренды по названию

Популярные бренды

Amazone Catros 2503 Special, Руководство по эксплуатации

Результаты поиска

Содержание Catros 2503 Special

Отзывы:

Бренды по названию

Популярные бренды