Amazone AmaTron 4, Руководство по эксплуатации

Страница: 4 / 111

2 Changing the tractor geometry data 44
3 Configuring the tractor sensors 45
3.1 Configuring wheel sensors 45
3.2 Configuring radar sensors 46
3.3 Activating GPS NMEA2000 47
3.4 Configuring the PTO shaft sensor 48
3.5 Configuring the working position
sensor
49
4 Renaming tractors 51
5 Deleting tractors 52
M Using the map view 53
1 Toggling the button bar 53
2 Showing and hiding the implement
information 54
3 Zooming the map 54
4 Switching to bird's-eye view 55
5 Focusing on the vehicle symbol 55
6 GPS drift correction 55
N Map view configuration 57
1 Activate warnings 57
2 Configuring the driving direction detection 57
3 Automatically creating a safety zone 58
4 Configuring the automatic zoom 59
5 Defining the map layers 60
O Working without documentation 61
1 Creating a new field 61
P Working with documentation 62
1 Creating a new field 62
2 Importing ISO-XML job data 63
3 Loading ISO-XML field data 64
4 Importing field data from a shape file 65
5 Creating a new job 66
6 Managing products 67
7 Managing the customers 70
8 Managing drivers 71
9 Exporting ISO-XML job data 73
Q Using part-width section control
74
1 Overlap, setting 74
1.1 Defining the overlap in the direction of
travel
74
1.2 Defining the degree of overlap 75
1.3 Defining the overlap tolerance 77
1.4 Defining the overlap tolerance at the
field boundary
78
2 Starting a recording 79
3 Terminating a recording 81
R Managing the field boundaries 82
1 Creating the field boundary 82
2 Editing field boundaries 83
S Managing headlands 84
1 Creating headlands 84
2 Editing the headlands 85
T Marking obstacles 86
U Parallel driving 88
1 Configuring parallel driving 88
1.1 Adjusting the light bar sensitivity 88
1.2 Selecting the track line pattern 89
2 Creating track lines 90
2.1 Creating an A-B line 90
2.2 Creating smoothed contours 90
3 Creating beds 91
4 Using a light bar 92
V Using automatic boom lowering 94
W Configuring AUX-N input
devices 96
1 Setting up AUX-N input devices 96
2 Managing preferred assignments 98
2.1 Confirming the AUX-N assignment 98
2.2 Changing the AUX-N assignment 98
| TABLE OF CONTENTS |
MG6010-EN-GB | G.1 | 13.12.2018 2