NOTE
When the first track line is not laid on the field
boundary, the first track line lies half of the working
width away from the field boundary inside the field.
4.
If the first track line should not be laid on the field
boundary,
deactivate
"First track line on the field boundary"
.
5. Confirm with
.
After the headlands have been created, the
headlands are shown as a grey area inside the field
boundary.
NOTE
To be able to start the application/spreading within the
headlands and use the track lines inside the
headlands, the headlands must be unlocked.
6.
To unlock the headland;
select
in the Work menu.
2
Editing the headlands
1. Tap on the headland.
2.
To rename the headland,
select
or
To delete the headland,
select
or
To open the headland settings,
select
.
CMS-T-00000309-B.1
S | Managing headlands | Editing the headlands
MG6010-EN-GB | G.1 | 13.12.2018
85