AmazonBasics B07F2C7GVT, Быстрый старт

Страница: 7 / 9

7
Installation
Step 8:
Check and Run Water
Handle (A)
Sprayer lever
Sprayer head (S)
Sprayer base (V)
Flexible
hose
(hot)
Water inlet valves
Flexible
hose
(cold)
• Check to make sure the faucet is tight.
• Slowly open one water inlet valve and check for leaks; if no leaks, open the valve all the way.
• Slowly open the other water inlet valve and check for leaks; if no leaks, open the valve all the way.
If a leak is spotted close the valve and remove water line and remove Teflon tape (if required) on threads
and re-tape the threads and connect the water line and repeat the process.
• Pull the handle (A) back and move it to the left and make sure you get hot water coming out of the faucet.
• Push the handle (A) all the way to the right and make sure you have cold water coming out the faucet
• Remove the sprayer head (S) from the sprayer base (V) and pull the hose out and make sure there is nothing obstructing
the hose from being pulled out and that the you can push the hose back in.
• With the water running, make certain the sprayer sprays when the lever is pushed in.
NOTICE