AmazonBasics B07F2C7GVT, Быстрый старт

Страница: 6 / 9

6
Installation
Step 6:
Install Sprayer Base
Sprayer base (V)
Threaded pipe (U)
Rubber washer (O)
Metal washer (P)
Mounting nut (Q)
• Remove mounting nut (Q), metal washer (P) and
rubber washer (O) from the threaded pipe (U).
• Insert sprayer base (V) into the hole.
• Slide the rubber washer (O) and metal washer (P) onto
the threaded pipe (U).
• Screw the mounting nut (Q) onto the threaded pipe (U)
and hand-tighten.
Make sure the sprayer base (V) is
centered over the sink hole and then finish tightening
mounting nut (Q) by hand.
• Use a cross-head screwdriver and tighten the 3 screws
on the mounting nut (Q).
Sprayer base (V)
Sprayer hose (R)
• Slide the sprayer hose (R) through the sprayer base (V).
Step 7:
Connect Sprayer Hose
Diverter (L)
Rubber
washer (M)
Sprayer
hose (R)
• Insert rubber washer (M) into diverter (L).
• Screw sprayer hose (R) into female end of the diverter (L)
and tighten with wrench.
WARNING