![background image](http://html1.mh-extra.com/html/amazon/b07v3qlz5y/b07v3qlz5y_manual_2919238011.webp)
EN
11
8.3
Flattening the sole
NOTICE
Make sure all parts are installed and in tension
before flattening the sole
(I)� Otherwise, the blade
(E)
becomes
flex once the parts are reinstalled to the tool.
1�
Affix a coarse sandpaper to a dead-flat surface, such as a
granite or cast iron table�
2� Draw lines across the entire sole
(I)
at regular intervals with a
permanent marker�
3�
Holding the tool with even pressure at the front and back,
work the sole (I)
over the sandpaper�
4� Pause periodically to check and continue until all lines on the
sole
(I)
fade evenly�
5� When all lines are removed, polish the sole
(I)
by working it
over a fine sandpaper.
8.4
Storage
»
Store in a cool and dry place away from children and pets,
ideally in original packaging�