![background image](http://html1.mh-extra.com/html/amazon/b07v3qlz5y/b07v3qlz5y_manual_2919238010.webp)
EN
10
NOTICE
Some lubrication solutions may interact with the
wood what may
affect the look of the wood. Ask your dealer for
an accurate lubrication solution�
8.2
Sharpening the blade
Use quality oil sharpening stones� Lubricate them with an accurate
lubrication solution�
1� Remove the blade
(E)
from the tool�
25°
30°
2� Place the cutting edge (K) against the sharpening stone at
approximately 25° angle�
3�
Slightly lift the blade (E) to a 30° angle.
4� Pull the blade
(E)
backwards to sharpen the cutting edge
(K)
�
Repeat until sharpened�
5� Draw the sharpened cutting edge (K) across the corner of a
scrap piece of wood to remove burr�
6� Reassemble the tool�