20
EN
• Set the function switch (E) to the
V~ Hz % VFD
position. “
AC
” will be indicated on the display.
• Insert the black connector lead (N) into the
negative
COM
input jack (L).
• Insert the red connector lead (N) into the
positive
input jack (K).
• Connect the test probes (N) in parallel to the
circuit under test.
• The stabilized value on the display (A) is read as
the actual reading.
VFD mode (Variable-Frequency Drive)
• In AC voltage measurement mode, press and
hold the
MODE
button (D) for 2 seconds. The
VFD
indicator (15) lights up.
• Connect the test probes (N) in parallel to the
circuit or component being measured.
• The stabilized value on the display (A) is read as
the actual reading.
NOTICE
Press the
MODE
button (D) for
2 seconds to return to normal operation. The
VFD
indicator (15) goes off.
