2.
Swipe left or right to preview the watch faces available. The Edit button will be displayed at the bottom of a
watch face that supports compilations. You can tap this button to go to the page for editing the compilations
of this watch face.
3.
Select the compilation to edit, and tap this compilation, or swipe up and down on the screen to switch
between compilations.
4.
After editing, press the side button to enable the watch face.
Always On Display
If this feature is enabled, the screen still displays some information in standby mode, which greatly reduces
battery life.
Set Always On Display:
1.
After you wake up your watch, press the side button to access the app list. Then go to Settings > Display and
Brightness > Always On Display.
2.
Select the watch face style and enable status for Always On Display.
Add watch faces
The watch provides several watch faces by default. You can also go to the Store in the Zepp app to synchronize
online watch faces to the watch, or set a picture on the phone as the watch face picture by using the Zepp app.
Add online watch faces:
1.
Keep the watch connected to your phone, open the Zepp app, and go to Profile > Amazfit GTS 2e > Store.
2.
Select one or more watch faces, then synchronize them to the watch to give yourself multiple options.
Add customized watch faces:
Keep the watch connected to your phone, open the Zepp app, go to Profile > Amazfit GTS 2e > Store, and go to
customized watch faces.
Change watch faces
1.
Wake up the watch face, and press and hold the watch face page to go to the watch face selection page.
