Amate Audio TPD, Руководство пользователя

Страница: 5 / 59

TPD Jul 2016
5
Amate Audio
3 MAIN CONTROLS AND CONNECTIONS
3.1 The front panel
Fig. 1. Front panel view
A)
Standby Switch
– Press this switch to set the system in standby mode (red led
lit). Press again to set the unit in normal mode (white led lit).
B) Cooling outs
–
Forced air output for temperature regulation.
C) Protection
– Led indicating the operation of any of the protection systems of one
or both channels. At power up (or recovering from standby or eco mode) it will
turn ON for a few seconds. If it does not turn OFF, indicates a problem of
malfunction of the amplifier.
D) EcoMode
– Led is lit when the low power consumption mode is on (will
automatically happen after a few minutes without input signal). To wake up the
amplifier, signal must be fed to the inputs.
E)
USB Connector
– A standard type B USB connector for interface with a PC or
Mac. Software and driver must be installed prior to usage.
F)
Mute keys
– Press for Mute/Unmute the output channels. When a channel is
muted, this key will light up in red for indication.
G)
Input signal LEDs - Show the current level of the Signal: Signal (-48dBu), -6dBu,
Limiter (orange), Overload (red). The Limiter led lights up if a gain reduction is
taking place (due to a programmed compressor). The Overload LED references
to the device's maximum headroom (+22dBu).
H)
Menu Control keys - There are 6 menu keys, with the following functionality:
<Channel: Choose previous channel for editing.
Channel> : Choose next channel for editing
<Select : Select previous parameter for editing
Select> : Select next parameter for editing
Menu : This key has different functions depending on when it is used:
-
In the Main Screen: Access the System Menu.
-
In the Main Menu allows entering the System Menu.
Exit : Exit to the Main Menu