Amaranten F1800 Series, Инструкция по установке и настройке

Страница: 10 / 34

Chapter 2. Installation
• Installation Guidelines, page 4
• Installing SFP modules, page 6
• Connecting Power, page 8
2.1. Installation Guidelines
Follow these guidelines when installing your Amaranten F 18 00 Series appliance:
• Make sure that the power source circuits are properly grounded, then use the power cord sup-
plied with the appliance to connect it to the power source.
• If your installation requires a different power cord than the one supplied with the appliance, be
sure to use a power cord displaying the mark of the safety agency that defines the regulations for
power cords in your country. The mark is your assurance that the power cord can be used safely
with the appliance.
• Ensure that the appliance does not overload the power circuits, wiring and over-current protec-
tion. To determine the possibility of overloading the supply circuits, add together the ampere rat-
ings of all devices installed on the same circuit as the appliance and compare the total with the
rating limit for the circuit. The maximum ampere ratings are usually printed on the devices near
the AC power connectors.
• Do not install the appliance in an environment where the operating ambient temperature might
exceed the specified operating range (see Chapter 7, Hardware Specifications).
• Make sure that airflow around the sides and back of the appliance is not restricted.
Note
Detailed information concerning power supply range, operating temperature range
etc. can be found at the end of this publication in Chapter 7, Hardware Specifications.
Flat Surface Installation
The F 18 00 Series device can be mounted onto any appropriate flat, level surface that can safely sup-
port the weight of the appliance and it's attached cables.
Caution
Please ensure there is adequate space around the unit for ventilation and access to op-
erating switches and cable connectors.
Rack Installation
A rack mounted Amaranten Security Gateway can be installed in most 19" standard racks. Fasten
the appliance with screws suitable for the kind of rack you are using. The following guidelines
should be followed:
• A rack or cabinet used for mounting should be adequately secured to prevent it from becoming
unstable and/or falling over.
4