Amano PIX-200, Руководство по эксплуатации

Страница: 8 / 48

1-4
Amano PIX-200 Operation Manual
Print Position
Adjuster
Bottom View
Print Position Adjustment (Slide Lever)
The print position from the paper
edge is adjustable by pressing and
sliding the print position adjuster
(slide lever) located on the right
outside bottom of the PIX-200 unit
as illustrated in the diagram.
The slide lever can be adjusted
using the latching mechanism which
can move a total of 17 increments
with each increment = 1.5mm (for a
total movement = 25.5mm). This
adjuster will move the paper-
detecting sensor forward or
backward to change the margin from
the paper edge to the print as illustrated in the following diagram.
The minimum distance from the form edge to print is approximately 0.5mm -
2.0mm. This is achieved when you slide the slide lever to the front of the
machine. The maximum distance from form edge to print is approximately
+25.5mm. This is achieved when you slide the slide lever to the back of the
machine.
Minimum Distance
Maximum
Distance
Slide Lever Print Position Adjuster
all the way forward
Slide Lever Print Position Adjuster
all the way backward