Amano PIX-200, Руководство по эксплуатации

Страница: 32 / 48

3-20
Amano PIX-200 Operation Manual
If the PIX-200 requires a password
•
When you press the ( + ) and ( E ) button at the same time for 2 seconds to
enter the “set up program” display.
•
When you press the ( +1 HOUR ) or ( +1 MIN. ) button to change the time.
In case you forget the password
You can enter the “set up program” display by entering “1441”. Make sure you
only use the (
- ) button when you input this password or this password will not
work.
Note: Once a password has been entered, whenever you attempt to press the
(+ ) and ( E ) buttons on the top of the unit at the same time, and hold
down for 2 seconds you will see PASS “ _ _ _ _ ” with the left “ _ ” blinking
to begin entering the 4 digit password. Once the correct password has
been entered,
SEt UP Pro9 will appear on the display and you can
perform changes to setup.