Amano MTX-15, Руководство по установке

Страница: 15 / 20

MTX-15 Page 13
To view the IP address set by the network, highlight Specify IP and
press Enter . Copy down the settings displayed in order to configure your
time and attendance software. Press the left function key or Esc to exit
the screen to maintain the automatic setting.
Note: It is important to exit this screen without saving. If save is pressed,
the terminal will reboot with the displayed address in manual mode
(see below); automatic IP setting will be disabled.
If you need to set the IP Address manually, highlight Specify IP and
press Enter to advance to the IP Address window.
You need to obtain the appropriate settings from your network
administrator.
Enter the IP Address, Subnet Mask and Gateway settings using the
numeric keypad. The Up and Down Function keys allow you to move
between the three fields.
Press the right Function key to save the setting. This will automatically
reboot the terminal. “Please Wait” and “Rebooting” will flash along the
bottom of the display for a few minutes while the terminal reboots. The
new settings will be in effect after the terminal reboots. The left Function
key will exit without saving your setting or rebooting the terminal.
Contrast
This function adjusts the contrast of the LCD display.
Use the Up and Down Function keys to darken or lighten the contrast.
Press the right Function key to save the setting and return to the
Diagnostic menu. The left Function key will exit without saving your
setting.