Amann Girrbach ceramill multi-x, Руководство по эксплуатации

Страница: 27 / 116

27
gB
O P e r at I n g I n s t r U C t I O n s
Upgrade kit Multi-x
InDex
Translation of the original operating instructions
1. Description of parts Ceramill Multi-x 26
2. Product description 28
3. Commissioning 28
4. assembly 28
4.1 Dismantling of the base table unit and installation of the spherical shell table 28
4.2 Dismantling of the base milling/sensing unit and installation of the vertical pantograph 29
4.3 Connection of the foot switch for controlling the compressed air 30
4.4 Resetting/Assembling the extractor dish 31
4.5 Setscrews for regulation of pressurized air stream 32
4.6 Electricity supply 32
4.6.1 Switching between voltages 32
4.7 Aspiration unit 32
5. Function of the foot switch 32
6. exchanging milling cutter and scanner 33
6.1 Adjust tool length 33
7. Calibration of the device (adjusting the magnification factor) 34
7.1 At the guide skid 34
7.2 Micrometer screw 35
7.2.1 Handling the micrometer screw 36
7.3 Table 37
8. spirit level 39
8.1 Adjust the device for manufacturing abutments 40
9. Control and adjust of the Ceramill Multi-x Upgrade kit 40
9.1 Control of the Upgrade Kit 41
9.2 Adjustment of the Upgrade Kit 42
10. Operation and handling of blank forms and fastening plates 43
10.1 Inserting the fastening plate and blank forms into the mounting plates 43
10.2 Inserting and turning the mounting plates 44
10.3 Tilting the spherical shell table 44
11. Maintenance/care 44
11.1 Cleaning and maintenance of the scanning and milling heads (handpieces) 45
12. warning and safety instructions: 46
13. technical data 46
14. accessories / Components 46
15. Packing list 47