4
Caution
To avoid property damage, protect soft vinyl or
other flooring with cardboard, rugs, or other
protective material when moving refrigerator.
Verify stabilizing leg is raised before moving
refrigerator. Raise stabilizing leg by turning
counterclockwise.
g. Slide appliance cart under side of refrigerator. Wrap
refrigerator with blanket or pad. Thread cart strap
around refrigerator and tighten. Do not overtighten
strap. Move refrigerator in front of final location.
h. Reverse doors if necessary.
Installation Instructions
Proper installation will ensure that this refrigerator
operates most efficiently. Amana cannot be responsible
for improper installation.
1. Remove and reverse doors if necessary.
a. Remove top hinge cover. Remove top hinge.
b. Remove freezer door.
c. Lift door closure off center hinge pin. Remove center
hinge pin.
d. Remove refrigerator door.
e. Remove center hinge bracket.
f. Remove toe grille and bottom hinge cover. Remove
bottom hinge.
2. Connect ice maker water supply line.
• See instructions on rear of refrigerator cabinet.
3. Plug in power cord.
4. Move refrigerator into final location.
5. Level refrigerator.
a. Remove toe grille. Remove bottom hinge cover if
refrigerator has a stabilizing leg.
b. Turn roller adjustment screw to raise or lower
refrigerator cabinet. Front of refrigerator must be
1/4" (6 mm) higher than back.
c. Turn stabilizing leg (some models) clockwise until
firmly against floor.
6. Review “Installation Checklist” in
Owner’s Manual with consumer.
i. Rehang doors by reversing steps a-f.
• Use a penny at top to space door 3/4" (18 mm)
from cabinet.
• Handle side of door should be approximately 1/8"
(3 mm) higher than hinge side.
Roller adjustment
screw
Bottom hinge cover
Stabilizing leg (some models)
Center hinge
pin
Bottom hinge
3/8" (9 mm) screws
Phillips
screws
Center
hinge
Top hinge
5/16" (8 mm) screws
