April 1998
105
RS5290000 Rev. 0
Kit Instructions
Introduction
Important
• Mechanical experience is required to install trim kit.
• Depending on installer’s knowledge and skill,
installation can take from one-half to one hour.
• If unable to solve a problem during installation,contact
source from whom kit was purchased.
Parts List
Procedure
!
CAUTION
To avoid personal injury, protect hands and arms.
Trim pieces may have sharp edges.
1.
Identify cabinet opening where opening is a
minimum of 69" (1753 mm) high, 24" (610 mm)
deep and 36" (914 mm) wide. Front corners of
counter top may need to be trimmed at a 45° angle
so doors will open completely.
36"
69"
24"
2.
Level refrigerator in cabinet opening according to
instructions in Owner's Manual. Roll refrigerator out
of opening to install kit.
3.
Slide a L-shaped bezel gusset into end of left and
right frame. Insert screws and tighten.
Item
Description
Qty
1
L-shaped Bezel Gusset
2
2
Bezel Gusset Machine Screw
4
3
Right Cabinet Frame
1
4
Left Cabinet Frame
1
5
Top Cabinet Frame
1
BI10, BI11, BI12, BI13 Perimeter Trim Kits
