Amana RFS10SW2 Series, Руководство пользователя

Страница: 8 / 40

8
TIME ENTRY pad is used to enter cooking
time for either manual entry or programming.
Cooking time ranges from 1 second (00:01)
to a total of 60 minutes (60:00) over four
stages. If more than 60 minutes of total microwave
cooking time is required, open door and inspect food
before beginning new cooking cycle.
Numbered pads begin cooking programs or enter times
and power levels for “Manual Time Entry” cooking. This
oven can store up to 10 cooking programs in memory.
POWER LEVEL
pads are used to
set microwave
power level. When cooking, the power level can be
decreased for foods that require slower more even
cooking. If cooking time is set and START pad pressed,
oven cooks at 100% power.
START pad begins Manual Time Entry
cooking or restarts an interrupted cooking
cycle. When programming, use to save time
and power level or to save a user option
setting.
STOP/ RESET pad exits programming mode
and stops cooking during cooking cycle.
Display
Some items in display can
be seen but are not
available.
Stages
This oven can be programmed to run 4 cooking
sequences consecutively. Each sequence is called a
stage. For example, the first stage could be programmed
to defrost at 20% power, the second to hold at 0% power,
the third to heat at 50% power, and the fourth to heat at
100% power. Total time for all cooking stages is displayed
and counts down.
User Options
User Options allows user to program oven to perform in a
way convenient to the user. Beeps and maximum cooking
time can be changed.
88:88
MICRO DEFR WARM MEDHI POWER HOLD
8
COOK
LEVEL
TIMER
READY
CLOCK
START
STOP
RESET
HOLD
0%
DEFROST
20%
MEDIUM
50%
MED-HI
70%
TIME
ENTRY
Operation
Single Pad Cooking
From the factory, oven is programmed to
store 10 cooking programs. Each pad
begins a cooking program.
MANUAL TIME ENTRY
Manual Time Entry feature allows the
operator to heat foods without changing the
preprogrammed pads. Time must be entered
and power level can be set before cooking.
START pad must be pressed to begin
cooking.
Cooking Methods
Programming Displays
This display indicates
oven is in programming
mode and ready to
program a numbered
pad(s).
This display shows briefly
when programming more
than one stage. It
indicates programming
mode for pad 02. The smaller “1” indicates stage 1 is
being programmed.
This display indicates
programming user options
mode. See “User Options”
section of manual for
programming procedure.
8 P:2 0
MICRO DEFR WARM MEDHI POWER HOLD
1
COOK
LEVEL
TIMER
READY
CLOCK
0P:--
MICRO DEFR WARM MEDHI POWER HOLD
8
COOK
LEVEL
TIMER
READY
CLOCK
8 P: 08
MICRO DEFR WARM MEDHI POWER HOLD
8
COOK
LEVEL
TIMER
READY
CLOCK
Cooking Displays
READY shows when
oven control will accept
entries.
25:20
shows cooking
time. When more than
one cooking stage is
programmed, total time
for all stages displays. POWER shows when microwave
energy is generated. Display will show DEFR, MED,
MED HI to indicate microwave power level used. If no
power display is shown, oven is cooking at 100% power.
88:88
MICRO DEFR WARM MEDHI POWER HOLD
8
COOK
LEVEL
TIMER
READY
CLOCK
25:20
MICRO DEFR MED MEDHI POWER HOLD
8
COOK
LEVEL
TIMER
READY
CLOCK
1
TIME
ENTRY
MEDIUM
50%
START