Amana P1199603M, Руководство по обслуживанию

Страница: 15 / 41

15 RS5320014 Rev. 0
Programming Instructions
Programming Hold during Stage(s)
Hold food without microwave power during one or any
stage.
1. Open oven door. Display shows “door”.
• If door is closed or RESET pad is pressed before
finishing programming sequence, oven exits
programming mode.
2. Press pad 1 for five seconds. After five seconds,
signal sounds. Display shows “P” and active menu.
3. Press ADD pad.
4. Press desired menu pad. Display shows active
menu.
5. Press desired number pad. Display shows selected
number pad, “ITEM”, heating time, “COOK LEVEL”
and power level (if other than 100 percent power) for
stage one.
• If multiple stages exist, display shows “STG” and
number of programmed stages.
6. Press number pads to enter desired hold time.
7. Press
POWER LEVEL pad.
8. Press HOLD pad.
• Press STATUS pad and repeat steps 6–9 of
Programming Multiple Stages section for
additional stages.
9. Press START pad to enter new time and power level
in oven memory. Display shows “P”.
10.Press RESET pad or close oven door to exit
programming mode.
Summary of Programming Multiple Stages
1. Open oven door.
2. Press pad
1 for five seconds.
3. Press ADD pad.
4. Press desired menu pad.
5. Press desired number pad.
6. Enter hold time.
7. Press
POWER LEVEL pad.
8. Press HOLD pad.
9. Press START pad.
10.Press RESET pad or close oven door.
Deleting Cooking Stages
1. Open oven door. Display shows “door”.
• If door is closed or
RESET pad is pressed before
finishing programming sequence, oven exits
programming mode.
2. Press pad
1 for five seconds. After five seconds,
signal sounds. Display shows “P” and active menu.
3. Press desired number pad to be deleted.
4. Press
DELETE pad twice. All cooking stages and
power levels for this item are set to zero.
Display shows “P”.
5. Press
RESET pad or close oven door to exit
programming mode.
Summary of Deleting Cooking Stages
1. Open oven door.
2. Press pad
1 for five seconds.
3. Press desired menu pad.
4. Press desired number pad to be deleted.
5. Press
DELETE pad twice.
6. Press RESET pad or close oven door.
Modifying User Time Limits
A user defined time can limit each set of programs
associated with each available menu pad. For example,
if user time limit for MENU 1 is 30 minutes, total cook
time of all available stages for a single number pad can
not exceed 30 minutes.
1. Complete steps 1–3 of Changing User Options.
2. Press desired menu pad to change. Display shows
active menu and present user time limit.
3. Press numbers to enter desired user time limit.
Display shows new user time limit.
4. Press corresponding menu pad again to save user
time limit. For example, if changing heating time limit
for MENU 1, press
MENU 1 pad.
5. Press RESET pad or close oven door to exit
programming mode.
Summary of Modifying User Time Limits
1. Open oven door.
2. Press pad
1 for five seconds.
3. Press hidden enable pad.
4. Press desired menu pad to change.
5. Enter desired heating time limit.
6. Press corresponding menu pad.
7. Press
RESET pad or close oven door.