manualshive.com logo in svg

Amana ARC700, Сервисная инструкция, Страница: 25 / 51

Поделиться
Скачать
Amana ARC700 Скачать руководство пользователя страница 25

DISCONNECT POWER BEFORE SERVICING, UNLESS TESTING REQUIRES IT.

25

RS2320001 Rev. 2

Testing Procedures

Bake Relay - K4

Double line break relay okay.  Drive voltage at J1
connector Pins 3 - 5.

1. Turn off power to oven.
2. Attach voltmeter lead to E18 connector on relay

board.

3. Attach voltmeter lead to E11 (BA) connector on relay

module.

4. Turn on power and touch the bake pad.
5. If 240 VAC is indicated bake relay is operating.

Broil Relay - K5

Double line break relay okay.  Drive voltage at J1
connector Pins 3 - 6.

1. Turn off power to oven.
2. Attach voltmeter lead to E18 connector on relay

board.

3. Attach voltmeter lead to E12 (BR) connector on relay

module.

4. Turn on power and touch broil pad.
5. If 240 VAC is indicated broil relay is operating.

Convection Element Relay - K2

Double line break relay okay.  Drive voltage at J1
connector Pins 3 - 11.

1. Turn off power to oven.
2. Attach voltmeter lead to E18 connector on relay

board.

3. Attach voltmeter lead to E6 (CV EL) connector on

relay module.

4. Turn on power and touch convection pad.
5. If 240 VAC is indicated convection element relay is

operating.

Function Switch Connection Check
Procedure

The Quick-Test mode can be used to verify relay
operation on the transformer/relay board.  If the relay
engages (clicks) during Quick-Test it is generally
operative.  To further verify operation each relay may be
tested for output with the following procedures.

1. Turn power on  with no functions engaged.
2. Place one meter lead on J1-1 (ground).
3. Place the other lead on the following test points.

J1-2

29 Vdc ±

If readings are not present

J1-10

23 Vdc ±

replace Transformer/Relay

J1-12

11.5 Vac ±

Board.

J1-13

12.5 Vac ±

If all test's are OK, replace

J1-14

23 Vdc ±

Display/Control Board.

Transformer/Relay Module

The relays for oven light, bake, broil, convection element,
convection fan and double line break are controlled by
the 24 VDC signal from the ERC.

Testing of the relays is with voltage applied to oven after
attaching voltmeter leads to appropriate terminals.

NOTE:  If bake, broil, or convection do not work the first
test would be the relay for double line break.

Double Line Break - K6

Drive voltage indicated at J1 connector Pins 1 - 3.

1. Turn off power to oven.
2. Attach voltmeter lead to E5 connector on relay

board.

3. Attach voltmeter lead to E18 connector on relay

module.

4. Turn on power and touch bake, broil, or convection.
5. If 240 VAC is indicated the double line break relay is

closing. Otherwise, replace the transformer/relay
board.

Содержание ARC700




















































Отзывы:

Нет отзывов