8
Display
The dress symbol on display indicates how much agitation time has been
selected. If bottom section of dress is activated, the minimal amount of time
has been selected for that cycle. If all bars inside dress have been
activated, then maximum amount of agitation time has been selected. See
chart below for agitation times.
CYCLE
1
st
BAR
2
nd
BAR*
3
rd
BAR
4
th
BAR
REGULAR
7-9 min.
10-12 min.
13-15 min.
16-18 min.
PERM.
PRESS
5-7 min.
8-10 min.
11-13 min.
14-16 min.
KNIT
6-7 min.
8-9 min.
10-11 min.
12-13 min.
DELICATE
5-6 min.
7-8 min.
9-10 min.
11-12 min.
HANDWASH
5-6 min
7-8 min.
9-10 min.
11-12 min.
Status Words
Words will display to tell you what
your washer is doing.
The numbers show time.
When a cycle is selected
they show agitation time.
After the START pad is
selected, they will show the total
wash time or count down time for a
delayed start.
WASH displays when the clothes
are being agitated.
RINSE displays when the clothes are
being rinsed.
SPIN displays when the tub is
spinning to remove the water.
SOAK displays when the washer is
paused or the clothes are soaking.
DELAYED START displays when
the washer is set for a delayed start.
Error Signals
If an invalid selection is chosen, the two-digit display will indicate “Er” and
the lowest volume signal will sound. The control will then display what was
previously displayed before the invalid selection was made. Refer to the
chart below for a listing of all invalid options per cycle.
CYCLE
YOU CAN’T SELECT
REGULAR
Warm Rinse (If Wash Temp is Cold, Regulated
Cold, Regulated Hot or Hot)
PERM PRESS
Warm Rinse
KNIT
Auto Prewash, Warm Rinse, Auto Pre-Soak
DELICATE
Auto Prewash, Warm Rinse, Auto Pre-Soak
SOAK
Auto Prewash, Extral Rinse, Warm Rinse
SPIN ONLY
Auto Prewash, Extra Rinse, Load Size, Soil Level,
Wash Temp, Warm Rinse, Delay Start, Auto Pre-
Soak, Save Favorite Cycles
HANDWASH
Auto Prewash, Auto Pre-Soak, Warm Rinse
COLD
HOT
Hot
120° F
Warm
70° F
Low
H EA V Y
L IG H T
4th Bar
3rd Bar
2nd Bar
1st Bar
The thermometer symbol measures temperature of water being used for
cycle. It has five stages:
Cold–household supply line temperature for the cold-running water in house.
Regulated cold–70°F (regulated by washer thermister unit)
Warm–Mixture of 40% hot water and 60% cold water from household supply.
Regulated hot–120°F (regulated by washer thermister unit)
Hot–household supply line temperature for hot-running water in house.
*factory preset
LARGE
SMALL
Super Plus
Large
Medium
Medium/Small
Small
The tub symbol on the display measures amount of water being used for
wash cycle. It has five stages
