Amana AEC2000 Скачать руководство пользователя страница 11

11

Replacing Oven Light

1.

Disconnect electrical supply.

2.

Remove screw holding panel to
side of the oven.

3.

Gently remove panel door.

4.

While wearing protective gloves,
turn light bulb counterclockwise to
remove.

5.

Replace light bulb with 120-volt,
25-watt appliance bulb. Do not
over-tighten bulb or bulb cover.
Over-tightening may make bulb
difficult to remove.

6.

Replace panel door before use.

7.

Reconnect power supply.

Care and Cleaning

PART

GENERAL DIRECTIONS

Oven interior

Clean microwave interior with mild detergent in warm water using a soft sponge or cloth. Wring sponge to
remove excess water before wiping microwave. DO NOT use abrasive cleaners or cleaners containing
ammonia. DO NOT use a citrus based cleaner. DO NOT use a water pressure type cleaning system. NEVER
pour water into the microwave oven bottom.

Control panel

Open oven door to deactivate oven control panel. Clean with mild detergent in warm water using a soft sponge
or cloth. Wring sponge to remove excess water before wiping the control panel. DO NOT use abrasive cleaners
or cleaners containing ammonia.

Outside finish

If present, remove plastic coating from outer case of oven.

Wash all glass with cloth dampened in soapy water. Rinse and polish with a dry cloth.

For stainless steel, use warm soapy water or a commercially available stainless steel cleaner designed for
kitchen appliance use. DO NOT use steel wool, abrasive powders or liquids, or a citrus based cleaner.

Damage to finish of outside of microwave due to improper cleaning is not covered by warranty.

Air intake filter

Clean filter weekly to maintain proper airflow.  Remove the filter to clean. Wash the filter in hot water and mild
detergent. Do not use the oven without a filter in place.

CAUTION

!

Wear gloves to protect hands
from accidental bulb breakage.

WARNING

!

To avoid risk of burns or electrical
shock:
• disconnect electrical supply to

oven before changing light bulb.

• before replacing light bulb make

sure oven and bulb are cool.

• do not operate oven without bulb

and cover in place.

Cleaning Stainless Steel

Stainless steel appliances have been factory finished for high shine and
luster. To maintain this quality appearance:

DO USE:

• Warm soapy water for routine

cleaning on a cool microwave.

• Dry with soft, clean cloth.
• For heavy soil, ONLY a stainless

steel cleaner designed for
kitchen appliance use.

DO NOT USE:

• Abrasive powders or liquids
• Citrus based cleaners
• Ammonia
• Steel wool pads
• Abrasive cloths,
• Oven cleansers,
• Acidic or vinegar based cleaners

Citric Acid

To prevent damage to the
finish of your stainless
steel appliance, do not

allow mustard, tomato juice, marinara
sauce, or other citrus based sauces
or products to remain on stainless
steel surface. Citric acid permanently
discolors stainless steel.

Damage to stainless steel finish due to improper use of cleaning
products, or using non-recommended cleaning products, is not
covered under warranty. 
For Amana recommended products, call our
Consumer Affairs division at (800) 843-0304.

Содержание AEC2000





























Отзывы: