Disassembly
25
RS5320016 Rev. 0
To avoid the risk of electrical shock, personal injury or death; disconnect power to oven and discharge capacitors
before following any disassembly procedure.
!
WARNING
Fan Blade
1. Pull blade off shaft.
2. When reinstalling blade, push blade on shaft and
rotate to insure clearance between fan blade and
motor mounting bolt.
Transformer
1. See “Component Location” Figure 3, for location.
2. Remove outer case and back panel.
3. Remove screws securing transformer to chassis.
4. Pry upward and back to release transformer from
chassis.
5. Remove wire connections from transformer.
NOTE:
When placing transformer back into chassis.
Front portion of transformer
must
slide into
base pan tab.
6. Reassemble transformer in reverse order.
Capacitor
1. See “Component Location” Figure 2, for location.
2. Remove outer case and back panel.
3. Discharge capacitor and remove wires from
terminals.
4. Remove capacitor bracket mounting screw.
5. Reassemble capacitor in reverse order.
NOTE:
Capacitor case must be installed into indent in
back panel.
Heater Box
1. See “Component Location” Figure 3, for location.
2. Remove outer case and back panel.
3. Remove wires connected to heating elements,
convection fan, and control thermal cutout.
4. Remove screws securing heater box.
5. Slide heater box sideways from chassis.
6. Reassemble heater box in reverse order.
Heating Elements
1. See “Component Location” Figure 5, for location.
2. Remove outer case and back panel.
3. Remove heater box.
4. Remove screws securing heater assembly to heater
box.
5. Reassemble heating element in reverse order.
NOTE:
Center heating element around convection fan
blade.
Convection Fan and Motor
1. See “Component Location” Figure 5, for location.
2. Remove outer case and back panel.
3. Remove heater box.
4. Remove left handed threaded nut on fan blade, and
slide fan off.
5. Remove screws securing convection motor to heater
box.
6. Reassemble convection motor in reverse order.
Fuse
1. See “Component Location” Figure 2, for location.
2. Remove outer case.
3. Replace fuse and reassemble in reverse order.
Содержание ACE530
Страница 5: ...5 RS5320016 Rev 0 Important Safety Information ...
Страница 6: ...RS5320016 Rev 0 6 Important Safety Information ...
Страница 7: ...7 RS5320016 Rev 0 Important Safety Information ...
Страница 31: ...A 1 RS5320016 Rev 0 Appendix A ...
