Amadas RMH1000M, Руководство пользователя

Страница: 29 / 52

RMH1000M Preparation
Purge the Fork Cylinder
1. Check the tractor’s hydraulic system to
make sure it has the proper fluid level.
2. Attach the RMH’s hydraulic lines to the
tractor’s hydraulics.
3. Slowly extend the fork cylinders out as far
as possible. There should be 80” between
the forks.
4. Check the tractor’s hydraulic fluid levels;
add fluid if necessary.
5. Cycle the cylinders a few times by opening
and closing forks to make sure all air is out
of the system.
6. Set the tractor’s hydraulic flow to the
desired speed.
7. Close the forks.
80” between forks
Cylinders fully extended
Fork cylinders are located behind shield
Attach hydraulic lines to tractor
MAN137 5/29/2015 19