Amadas RMH1000M, Руководство пользователя

Страница: 28 / 52

Preparation RMH1000M
Hydraulic System
Make sure all hydraulic hoses are correctly
attached and that all hose and connection
designations match.
Before running the RMH for the first time,
purge the hydraulic system of air. This is
necessary to prevent damage to the RMH
and/or injury to you. Instructions for purging
the system begin on the next page.
Use the appropriate size of tractor (200+ HP)
to operate the RMH. The RMH may require
up to 6 gallons of hydraulic fluid to charge with
all cylinders fully extended.
WARNING
When working with hydraulics, remember
the following:
•
Escaping hydraulic fluid under
pressure can penetrate the skin,
causing skin injury.
•
Avoid the hazard by relieving pressure
before discontinuing hydraulic or other
lines. Tighten all connections before
applying pressure.
•
Search for leaks with a piece of
cardboard. Protect hands and body
from high pressure fluids.
If an accident occurs, see a doctor
immediately. Any fluid injected into the
skin must be surgically removed within a
few hours or gangrene may result.
Doctors unfamiliar with this type of injury
should reference a knowledgeable
medical source. Such information is
available from Deere & company Medical
Department in Moline, Illinois, USA. (309-
765-8000)
CAUTION
It is important that your tractor have
sufficient hydraulic capacity. If it does not,
the cylinders will not raise and lower
evenly, which can damage the RMH.
Insufficient hydraulics can also make the
RMH less stable, increasing the risk of
injury.
NOTE! During the purging process,
check the tractor hydraulic fluid level after
each step. Failure to do so could result in
damage to the tractor’s hydraulic system.
18 5/29/2015 MAN137