Amada MM-315B, Руководство по эксплуатации, Страница: 25 / 36

MM-315B
5. Measurement
5-14
Confirmation of All Impulse Memory
After the weld is performed using the previous weld schedule, press the
/4
button.
Press
/4
.
M 2 . 4 5 K 1
The Impulse No. 1 current value is shown.
To check the time, press
/4
again.
Press
/4
.
M 0 3 C 1
The cycle value of Impulse No. 1 is shown.
To check the conduction degrees, press
/4
again.
Press
/4
.
M 0 8 4 ° 1
The conduction degrees of Impulse No. 1 are shown.
By using the
㧗
and
㧙
buttons, the Impulse No. can be changed and the
values checked.
In other words, the
/4
button is used to select the current, time, and
conduction-degree displays. The
㧗
and
㧙
buttons are used to set the
impulse No.
Memory M is fixed.
Current value
Impulse No.
Cycle value
Impulse No.
Conduction degrees Impulse No.