Amada MM-315B, Руководство по эксплуатации, Страница: 18 / 36

MM-315B
5. Measurement
5-7
When the Impulse No. is 1-9
The display shows the information only for the number that has been set
when the Impulse No. is 1 to 9. For example, when the Imp. No. is set to 2
and the weld pattern is the same as Imp. No. 0, the following is displayed:
Setting
L o 2 0 1
Weld Pattern
When the
%744
&')
button is pressed for measurement, and there is no
impulse for the number set,
* S E T E R R
is displayed. As to judgment of the Impulse No., refer to All Impulse
Memory in “Chapter 5 (7)”.
Impulse No. 2
Display does
not change readout of
Imp.2 Disappears at the
beginning of Impulse 2 Displays previous
readout
Display
Impulse 1 Impulse 2 Impulse 3