2.3.1 FUNCTION 1: LINE TEST
If activated, the AMA3 will generate a line test according to the programmed time interval.
Send the following message to the AMA3:
Fxxxx1=z
F =
stands for FUNCTION
xxxx =
stands for the password
1 =
stands for the function type
z =
stands for the line test status
(
0
= switched off (default value),
1
= every day,
2
= every week,
3
= every month).
Do not enter any spaces before or in your message. After about 45 seconds the AMA3 will send a SMS
message to confirm.
2.3.2 FUNCTION 2: AUX INPUT (AUX ALARM)
Immediate or delayed alarm (NO or NC) – switched to ground.
Send the following message to the AMA3:
Fxxxx2=z
F =
stands for FUNCTION
xxxx =
stands for the password
2 =
stands for the function type
z =
stands for the status
0
= direct alarm and NO-input negative triggered
1
= direct alarm and NC-input negative triggered
2
= delayed alarm (15 seconds) and NO-input negative triggered (default value)
3
= delayed alarm (15 seconds) and NC-input negative triggered
4
= NO-input with recognition through push button
5
= NC-input with recognition through push button
Do not enter any spaces before or in your message. After about 45 seconds the AMA3 will send a SMS
message to confirm.
The modification of a value will be active after receiving a confirmation message by SMS.
The AMA3 will send a message with the following information to your cell phone:
AMA3 R5.01
AUX ALARM
CONTACT: OFF
BAT=OK SIG=4
GPS=0/1
TIME:201446
DATE:010707
50:55:34 N
005:26:31 E
SPEED:0.00
OUTPUT OFF/ON
22
