AlzaPower APW-PS600, Руководство пользователя

Страница: 9 / 72

9 ENGLISH
Using the station
Make sure before each use that the battery is installed and fully charged.
Station use - alternating current
The portable station allows to supply up to 5 appliances with alternating current at the same time,
provided that the total power does not exceed 2,000 W.
1. Press and hold the power switch to turn on the station. The power switch indicator and the display
light up. The station switches to standby mode.
2. Insert the plug of the appliance into the power outlet in the station.
3. Press the AC button to turn on the AC power for the appliance.
4. After use, press the AC button to turn off the power. The station switches to standby mode. Un-
plug the appliance from the power outlet.
5. To switch off the station completely, press and hold the main switch.
Station use - direct current
1. Press and hold the power switch to turn on the station. The power switch indicator and the display
light up. The station switches to standby mode.
2. Plug the cable end of the device you want to charge to the DC connector.
3. Press the DC button to turn on the DC power of the device.
4. After use, press the DC button to turn off the power. The station switches to standby mode. Pull
out the connector from the port.
5. To switch off the station completely, press and hold the main switch.
Station use - USB output
1. Press and hold the power switch to turn on the station. The power switch indicator and the display
light up. The station switches to standby mode.
2. Press the USB button to turn on the device via USB.
3. Plug the end of the USB connecting cable into the USB port. Plug the other end of the USB con-
necting cable into a port on your device.
4. After use, press the USB button to turn off the power. The station switches to standby mode. Pull
the terminal out of the USB port.
5. To switch off the station completely, press and hold the main switch.
Use of the UPS backup function
1. Connect the portable station to the power outlet using the supplied power adapter. The station
turns on automatically and starts charging.
2. Plug the appliance into the power outlet in the station.
3. Press the AC button to start the alternate current. The connected equipment enters UPS backup
mode.
4. If you disconnect the portable station from the electrical outlet, the station will continue to supply
power to the connected device.
Attention:
Make sure that the portable station is plugged into a properly grounded AC outlet with a stable and
normal voltage.
To make sure that the UPS backup function is used correctly, the total power of the connected devices
must be less than 1,300-1,500 W. If the power is greater than 1,300-1,500 W, the portable station will
automatically shut down power for safety reasons, and shut off charging from an AC outlet and will
only power the connected devices.
INSTRUCTIONS