8
want. Then press MODE: You can choose several targets to be eliminated. After
that press ENTER to confirm the selected target to be eliminated. To pick up the
eliminated items, simply press MODE before pressing ENTER. Or repress SET
twice and UP or DOWN to move the flashing frame to the target you want to pick.
Then press MODE and ENTER.
NOTE: A crossed frame is for item eliminated.
5. PINPOINT
After you find a metal object, you can use P/P to pinpoint the target. Hold down P/P
button. LCD will display P/P and an icon of eye. Slowly move the search coil above the
sound area. The detector sounds and the depth indicator on the LCD displays the
probable depth of the target. Then release the button. Sweep the search coil again,
keeping the same distance of search coil, sound disappears Hold down P/P again, closer
the search coil to the sound area, the detector sounds again. Repeat the above steps
until the detector displays the stronger signal where the location of the target is.
Testing and using the detector
To learn how the detector reacts to different metals, you should test it before you use it
the first time. You can test the detector indoors and outdoors.
Indoor Testing and Use
1. Press POWER to power on the detector.
2. Follow the instructions described in OPERATION to set SENSITIVITY, VOLUME, and
operation mode.
3. Place the detector on a wooden or plastic table, then remove any watches, rings, or
metal jewellery you are wearing.
4. Adjust the search coil so the flat part points towards the ceiling.
NOTE:
Never test the detector on a floor inside a building. Most buildings have metal of some
kind in the floor, which might interfere with the objects you are testing or mask the
signal completely.
