7
SILVER RANGE
1 - indicates that the target is probably 1 or 10 coin.
10 /25 /1 - indicates that the target is probably silver coin, 10 /25 /1 . Some
large aluminium coin might register within this category.
50 - indicates that the target is probably 1 , 50 or a silver coin.
Tones
There are three tomes for different kinds of metal type. This makes it easier to identify
the metal being detected.
When the detector finds iron, nail, bottle caps, it sounds a low tone. A medium tone is
for 5 , 1 , 10 , some gold rings, aluminium pull tabs, zinc or copper items. A high
tone is for 25 , 50 , 1 or silver items.
LOW TONE
MEDIUM TONE
HIGH TONE
Operation
1. Press POWER button to turn on the detector. Pres POWER again to power off. LCD
displays all symbols.
2. SETTING SENSITIVITY
Press SET, sensitivity level bar flashes. Then press UP button to higher the sensitivity or
press DOWN button to lower it. After that, press ENTER to confirm the setting.
3. SETTING VOLUME
Press SET three times; the volume icon flashes. Press UP button or DOWN button to
higher or lower the volume level. Then press ENTER to confirm the setting.
4. SETTING THE OPERATION MODE
The detector comes with three operating modes of ALL METAL, DISC, PINPOINT.
•
ALL METAL
– used for detecting all types of metal.
Press SET twice, then ENTER to get ALL METAL. In this mode, the unit can default all
kinds of metal.
•
DISC –
Used for target discrimination. You can set the target range or eliminate
the target you do not want by pressing SET and MODE buttons. Press SET twice,
the blank frame flashes, press UP or DOWN to choose the target you do not
