LP11 Suspended Installation Guide
8 of 12
102-000026 - IG090320-A.0
Installation: Connecting Multiple
Sections (Cont.)
Tighten joiner screws, as shown. Ensure each section is
properly aligned, and that there are no gaps between
sections.
18
Tighten Joiner Screws on Inner Corner
Align sections and join, as shown.
CAUTION:
Take care not
to pinch wires.
16
Mitered Corners: Align & Join Sections
Tighten joiner set screws, as shown, using a 1/8” hex key
for the sides and a 5/64” hex key for the bottom. Ensure
each section is properly aligned, and that there are no
gaps between sections.
15
Tighten Joiner Screws
Connect wiring quick-connects between sections. Match
each color, as shown.
NOTE:
Color combinations may
vary.
19
Connect Wiring Between Sections
SHOCK HAZARD! May result in serious injury or death.
Turn
power OFF at circuit breaker prior to installation or servicing.
Tighten set screws to secure outer corner bracket to
joined section using a 1/8” hex key. Ensure each section
is properly aligned and that there are no gaps between
sections.
17
Tighten Set Screws on Outer Corner
Re-install each metal cover. Skip steps 21A -21B if there is
no indirect uplight.
CAUTION:
Do not pinch wires
while reattaching!
20
Re-install Cover
