LP11 Suspended Installation Guide
LP11 Suspended Installation Guide
7 of 12
102-000026 - IG090320-A.0
Installation: Standard Suspension
(Cont.)
Turn breaker ON and check if fixture operates as
intended and that there are no loose connections.
11
Turn Power On
Installation: Connecting Multiple
Sections
Carefully remove metal cover or diffuser(for indirect light
only) to expose joiner sections.
12
Remove Cover/Diffuser
Mount Canopy Bracket to J-Box using appropriate
mounting hardware, then secure Canopy over J-Box with
Ceiling Fitting using 1/8” Allen Key. Attach bullet (with ca
-
ble) to canopy.
CAUTION:
Do not pinch wire connections.
10
B Combo Canopy Installation
!
DO NOT PINCH OR PUT EXCESSIVE TENSION ON WIRES
while
installing canopy.
Mount Canopy Bracket to J-Box using appropriate
mounting hardware, then secure Canopy over J-Box with
finial.
CAUTION:
Do not pinch wire connections.
10
A Mount Canopy Bracket to J-Box & Secure Canopy
!
DO NOT PINCH OR PUT EXCESSIVE TENSION ON WIRES
while
installing canopy.
Remove heatsink/reflector and hang over side of fixture.
CAUTION:
Do not apply excessive tension to wires!
13
Remove Heatsink/Reflector
Loosen set screws and slide out joiner bracket halfway
to allow for joining. Join sections together, as shown,
ensuring correct alignment. See final/record drawing for
more details.
CAUTION:
Do not pinch wires while joining!
14
Align and Join Sections Together
