background image

28

  

   

Language:

 

English  

Model

Netti 4U comfort|FA  

Version:

 November 2010

Language:

 

English  

Model:

 

Netti 4U comfort|FA

  

Version:

 

November 2010    

   

Language:

 

English  

Model

Netti 4U comfort|FA  

Version:

 November 2010

Language:

 

English  

Model:

 

Netti 4U comfort|FA

  

Version:

 

November 2010    

Companion:

If the user is left alone in the wheelchair,
always lock the brakes and check that the 
anti tips are turned down.

Parking: 

Increase the underneath support of the
wheelchair by moving the chair about 10 
cm rearwards making the front castors 
turn forward.

How to use the companion brakes:

• To lock: Pull the handle upwards and push 
   the red handle into locking position.
• To open: Pull the handle a little more 
   up until the red handle is released and the   
   handle can be slipped back into position.

8.2 Driving techniques
         - Step up-

Companions, drive up a step forwards:

• Check that the anti tip is turned up.
• Angle the wheelchair backwards. 
• Balance the chair on the mainwheels  
  and push it forward until the front          
  castors are on the step. 
• Lift the push handles while pushing the  
   chair onto the step.

Turn the anti tip downwards.

Users, drive up a step backwards:

This technique is only useful if the step 
is very low. It also depends on the          
clearance between the footplates and the  
ground.
• Check that the anti tip is turned up.
• Drive the chair backwards towards the    
   step
• Make a firm grip on the push rims and
   move the body forward while pulling.

Turn the anti tip downwards.

Companions, drive up a step
backwards: 

• Check that the anti tip is turned up
• Pull the chair backwards next to the  

    

   step
• Angle the wheelchair backwards,    

    

   moving the front castors slightly up in  

    

   the air.
• Pull the wheelchair up the step and go 
   backwards long enough to put down the 
   front castors on the step.

8.3 Driving techniques
         - Step down-

Companions, drive down a step forwards:

• Check that the anti tip is turned up
• Angle the wheelchair backwards, moving 
   the front castors slightly up in the air.
• Drive carefully down the step and angle  

    

   the wheelchair forward putting the front 
   castors back on the ground.

Turn the anti tip downwards.

Companions, drive down a step    

 

backwards: 

• Check that the anti tip is turned up.
• Move the wheelchair backwards to the      

       

    step.   
• Drive carefully down the step and          

    

   move the wheelchair backwards on the  

    

   main wheel until the front castors have  

    

   come away from the step.
• Put the front castors down on the          

    

   ground.

Turn the anti tip downwards

  

Содержание Netti 4U comfort FA









































Отзывы: