Alu Rehab Netti 4U comfort CED, Руководство пользователя

Страница: 31 / 40

my-netti.com
31
Model: Netti 4U
CE
Language:
English
Version:
2017-06
9.2 folDING for TrANSPorT
When the wheelchair is unoccupied, fold it
as described below. Put the wheelchair in the
trunk or back seat. When placed in the back
seat, secure all parts and the frame using
safety belts.
• remove the head support (chapt. 6.10)
• turn the anti-tips upwards (chapt. 6.7)
• remove the arm supports (chapt. 6.11)
• remove the leg supports (chapt. 6.9)
• Pull out the locking bolt for the back rest,
and place the back rest forward in the seat
(chapt. 6.5)
• remove the main wheels (chapt. 6.2)
• remove the front castors (chapt. 6.3)
9.3 TrANSPorT IN AIrPlANE
netti 4u ce wheelchair may be transported
in airplane without any restrictions.
the netti 4u ce wheelchair is equipped with
2 gas springs. these are however not classi-
fied as dangerous goods.
contrary to general dangerous goods instruc-
tion un3164, the iata-Dgr ( special regula-
tion a114) rules that the goods that contain
gas and are determined to function as shock
absorbers ( including energy-absorbing
devices or pneumatic springs) are not
subject to the transport instructions i.e. they
are indemnified from the following require-
ments:
a) each article has a gas volume which does
not exceed 1,6 l and a charge pressure not
exceeding 250 bar, where the product of the
capacity expressed in liters and charge pres-
sure expressed in bars doesn’t not exceed 80.
b) each article has a minimum burst pressure
of 4 times the charge pressure at +20 degree
celsius for products not exceeding 0,5 l gas
space capacity.
c) each article is made of material that
will not fragment.
d) each article was manufactured in
accordance to quality standard which
is approved by the responsible national
authority
e) it is proven and shown that the
article relives its pressure by means of
a fire degradable seal or other pressure
relief device such that the article will
not fragment and the article does not
rocket.
9.4 TrAVEllING oN PUblIC
TrANSPorT
the wheelchair should be put in a
special area for wheelchairs. the
wheelchair should face opposite the
direction of travel. the back of the
wheelchair must be located against a
fixed object such as a row of seats or a
partition. make sure the user can easily
reach any hand rails or handles.