Altusen KL0116, Руководство пользователя

Страница: 42 / 66

(F4 ADM: continued)
Setting Function
RESET
STATION IDS If you change the position of one of the Stations in the daisy chain,
the OSD will no longer correspond to the new configuration. This
function rescans the installation’s Station positions and updates the
OSD.
Note: Only the Station Numbers are updated. Except for the Port
Names, you must redo all Administrator settings (such as Set
Accessible Ports, Set Quick View Ports, etc.), for all of the KVM
stations affected by the change.
FIRMWARE
UPGRADE In order to upgrade the KL0116’s firmware (see Chapter 1), you
must first invoke Firmware Upgrade Mode with this setting.
F5 SKP:
This function enables you to easily skip backward or forward - switching the
console focus from the currently active computer port to the previous or next
available one. The computers that can be accessed under Skip Mode are se-
lected with the Scan/Skip Mode setting under the F3 SET function (see p. 30).
w
Press an Arrow key to perform a skip, as shown in the table, below:
[
←
] Skips from the current port to the previous port on the List.
[
→
]
Skips from the current port to the next port on the List.
[
↑
]
Skips from the current port to the last port of the previous
Station on the List.
[
↓
]
Skips from the current port to the first port of the next Station
on the List.
Note: When you Skip, you only Skip to the the previous or next available
computer that is in the Scan/Skip Mode selection (see p. 30).
w
If a Port has been selected for Scan/Skip Mode, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display.
w
While Skip Mode is in effect, ordinary keyboard and mouse functions are
suspended - only Skip Mode compliant keystrokes can be input. You must
exit Skip Mode in order to regain normal control of the console.
w
To exit Skip Mode, press [Spacebar] or [Esc].
2003-07-25
34