Altusen Hideaway KL3116 Скачать руководство пользователя

Страница: 76 / 90

KL3116 User Manual

Upgrade Failed

If the upgrade failed to complete successfully a dialog box appears asking if
you want to retry. Click

Yes

to retry. If you Click

, the

Upgrade Failed

screen appears. Click

Cancel

to close the Firmware Upgrade Utility. See the

next section,

Firmware Upgrade Recovery

, for how to proceed.

Firmware Upgrade Recovery

There are basically two conditions that call for firmware upgrade recovery:

When you begin a firmware upgrade, but decide not to proceed with it.

When the Mainboard firmware upgrade fails.

Note:

If one of the cascaded switches fails to upgrade successfully, unplug it
from the installation and perform the recovery and upgrade operation
independently. After it has been successfully upgraded, plug it back into
the installation.

To perform a firmware upgrade recovery, do the following:

1. Unplug the switch's power adapter cable.

2. Slide the

Firmware Upgrade Recovery Switch

(see page 8) to the

Recover

position.

3. Use the Firmware Upgrade Cable (provided with this unit), to connect a

COM port on your computer with the Firmware Upgrade Port of the
switch.

4. Plug the switch's power adapter cable back in.

5. Follow the upgrade procedures that begin with the

Starting the Upgrade

section (see page 59).

6. After the upgrade completes successfully, unplug the switch's power

adapter cable, once again.

7. Slide the

Firmware Upgrade Recovery Switch

back to the

Normal

position.

8. Plug the switch's power adapter cable back in.

This completes the Firmware Upgrade Recovery operation, and your switch is
ready for use.

kl3116.book Page 62 Friday, July 7, 2006 11:54 AM

Содержание Hideaway KL3116



























































































Результаты поиска

Содержание Hideaway KL3116

Отзывы:

Похожие инструкции для Hideaway KL3116

Бренды по названию

Популярные бренды

Altusen Hideaway KL3116, Руководство пользователя

Результаты поиска

Содержание Hideaway KL3116

Отзывы:

Похожие инструкции для Hideaway KL3116

Бренды по названию

Популярные бренды