ALTUS MLB 2410 Скачать руководство пользователя страница 67

Страница: 67 / 74

BIOS Setup

1230B0049401

4-1

4 BIOS

Setup

This section describes the BIOS Setup Utility options. You can run BIOS Setup with or without

an operating system being present. Onboard devices are configured with the BIOS Setup utility

that is embedded in flash ROM.

The configuration utilities allow you to modify the CMOS RAM and NVRAM. The actual

hardware configuration is accomplished by the BIOS POST routines and the BIOS Plug-N-Play

auto-configuration manager. The configuration utilities update a checksum for both areas, so

potential data corruption is detected by the BIOS before the hardware configuration is saved. If

the data is corrupted, the BIOS requests that the user reconfigure the system and reboot.

Because the BIOS code is the most often changed part of the motherboard design,

the BIOS information described in this section may be a little different compared to

the actual BIOS that contained in your motherboard.

4.1 BIOS Setup Utility

This section describes the ROM-resident setup utility that provides the means to configure the

platform. The BIOS Setup utility is part of the system BIOS and allows limited control over

onboard resources.

The user can disable embedded PCI devices through the setup menus. When these devices are

disabled through setup, their resources are freed.

The following embedded devices can be disabled through setup menus, making them invisible

to a plug-and-play operating system that scans the PCI bus:

Onboard NIC 1 and NIC 2 embedded in nVIDIA MCP55Pro

Onboard NIC 3 and NIC 4 embedded in nVIDIA IO55 (For 2U)

Onboard ATI RN 50 VGA

Содержание MLB 2410











































































Результаты поиска

Содержание MLB 2410

Отзывы:

ALTUS MLB 2410, Руководство пользователя, Страница: 67 / 74

Результаты поиска

Содержание MLB 2410

Отзывы: