ALTUS MLB 2410 Скачать руководство пользователя страница 11

Страница: 11 / 74

About This Manual

1230B0049401

iii

Safety Precautions

Observe the following safety precautions when you are connecting or disconnecting any device.

Regarding the standards of workstation regulations, do not place the server in the visual

field of the user, because of the glossy front of the case.

The product is non-consumer product and for profession technical person used only.

Operation Safety

Any operation on this server must be conducted by certified or experienced engineers.

Before operating your server, carefully read all the manuals included with the server

package.

Before using the server, make sure that all cables are correctly connected and power

cords are not damaged. If any damage is detected, contact your dealer as soon as

possible.

To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,

sockets and circuitry.

Before opening the chassis panels, make sure all power cords are unplugged.

Avoid dust, humidity, and extreme temperatures, place the server on a stable surface.

If the power supply is broken, do not try to fix it by yourself. Contact an authorized dealer.

It is recommended that you wear gloves when assembling or disassembling the server to

protect from cuts and scrapes.

When the server is powered on, heat sinks and the surfaces of certain IC devices may be

hot. Do not touch them. Check whether the fans are functioning properly.

Electrical Safety

Before installing or removing signal cables, ensure that the power cords for the system

unit and all attached devices are unplugged.

To prevent electric shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

When adding or removing any additional devices to or from the system, ensure that the

power cords for those devices are unplugged before the signal cables are connected. If

possible, disconnect all power cords from the existing system before you add a device.

Use one hand, when possible, to connect or disconnect signal cables to prevent a

possible shock from touching two surfaces with different electrical potentials.

Содержание MLB 2410











































































Результаты поиска

Содержание MLB 2410

Отзывы:

ALTUS MLB 2410, Руководство пользователя, Страница: 11 / 74

Результаты поиска

Содержание MLB 2410

Отзывы: