ALTUS MLB 2410 Скачать руководство пользователя страница 26

Страница: 26 / 74

Hardware Operations

1230B0049401

2-1

2 Hardware

Operations

This chapter provides the detailed information and replacement steps for motherboard, including

system battery, processor, system memory, and system configuration jumper.

2.1 Before

You

Start

Take note of the following precautions before you remove or install any components on the

motherboard.

The server does not completely power off when the front panel power button is pressed. The

button toggles server power between On and Hiberation. In Hiberation, the server removes

power from most electronics and drives, while portions of the power supply and some internal

circuitry remain active. To completely remove all power supplies from the system, disconnect

the power cords from the server.

Moving the Power On/Off switch to the Off position does not completely remove

system power. Some portions of the power supply and some internal circuitry remain

active. Disconnect all power cords from the server to remove all power from the

system.

To power off the server, please refer to “2.1.1 Power Off” in the Chassis User Manual.

The components shown in this chapter are mainly for your reference. Please take

the actual shipment as standard.

To reduce the risk of injury from electric shock, remove the power cord to completely

disconnect power from the system.

Содержание MLB 2410











































































Результаты поиска

Содержание MLB 2410

Отзывы:

ALTUS MLB 2410, Руководство пользователя, Страница: 26 / 74

Результаты поиска

Содержание MLB 2410

Отзывы: