Altronix T1CVK3F4, Руководство по установке

Страница: 3 / 12

Trove CDVI Kits Installation Guide - 3 -
T1CVK3F4: Configuration of CDVI A22K/A22NB/ADH10 Boards
1. Fasten spacers (supplied with A22K/A22NB/ADH10) to CDVI A22K/A22NB/ADH10 board (Fig. 2b, pg. 3) .
2. Mount CDVI A22K/A22NB/ADH10 boards into the correct positions (Fig. 2, pg. 3) by postioning spacers over appropriate holes
on the backplane and depressing down on board to secure spacer to the backplane (Fig. 2a, 2b, pg. 3).
Note: CDVI A22K/A22NB/ADH10 boards have one (1) RJ45 jack each.
Please make sure that they are mounted correctly, as shown in Fig. 2 below.
3. Fasten backplane to Trove2 enclosure utilizing pan head screws (provided).
Fig. 2
RJ45 Jack
CDVI - A22K/A22NB/ADH10
RJ45 Jack
CDVI - A22K/A22NB/ADH10
NC C NO NC
C NO
AC FAIL
BAT FAIL
TRIGGER
AC
DC
AC1
EOL
NO
GN
D
SUPERVISED
RESET
+AUX-
- BAT + - DC +
Altronix - eFlow6NB
L G
N
OFF - 24
V
ON - 12
V
ON
---
+
Control
---
+
Po
wer
NO C NC
FACP
INTERF
ACE
+ INP
---
T
+
RET
---
TRG
TRIGGER
INPUT
IN GND
1
NC C NO COM
OUTPUT 1
NC C NO COM
OUTPUT 2
NC C NO COM
OUTPUT 3
NC C NO COM
OUTPUT 4
IN GND
3
IN GND
4
IN GND
2
LED1 LED2 LED3 LED4
SW1 SW2 SW3
SW4
MAIN
Altronix - ACM4
Spacer
CDVI - A22K/A22NB /ADH10
Access Controller
Backplane
Fig. 2a
Plastic Spacer
pre-mounted into
CDVI Atrium modules
Insert into
TC1 backplane
Fig. 2b