Altronix T1CVK3F4, Руководство по установке

Страница: 5 / 12

Trove CDVI Kits Installation Guide - 5 -
T2CVK33F10 and T2CVK33F10Q: Configuration of CDVI A22K/A22NB/ADH10 Boards
1. Fasten spacers (supplied with A22K/A22NB/ADH10) to CDVI A22K/A22NB/ADH10 board (Fig. 4b, pg. 5) .
2. Mount CDVI A22K/A22NB/ADH10 boards into the correct positions (Fig. 4, pg. 5) by postioning spacers over appropriate holes
on the backplane and depressing down on board to secure spacer to the backplane (Fig. 4a, 4b, pg. 5).
Note: CDVI A22K/A22NB/ADH10 boards have one (1) RJ45 jack each.
Please make sure that they are mounted correctly, as shown in Fig. 4 below.
3. Fasten backplane to Trove2 enclosure utilizing pan head screws (provided).
NC C NO NC C NO
AC FAIL BAT FAIL
TRIGGER
AC DC AC1
EOL NO GND
SUPERVISED RESET
+AUX-
- BAT
+-
DC
+
L G N
OFF - 24V
ON - 12V
ON
NC C NO NC C NO
AC FAIL BAT FAIL
TRIGGER
AC DC AC1
EOL NO GND
SUPERVISED RESET
+AUX-
- BAT
+-
DC
+
L G N
OFF - 24V
ON - 12V
ON
- DC INPUT
+
POS (+) DC OUTPUT (ALARM
)
POS (+) DC OUTPUT (STANDBY) 6 7 8 9 10
1 2 3 4 5
TRIGGER
LED
POWER ON LED
NEG1 NEG2 NEG3 NEG4 NEG5
TRIGGER
NC C NO NC C NO DRY OUTPUT POWER FAIL
- INPUT +
- DC INPUT
+
POS (+) DC OUTPUT (ALARM
)
POS (+) DC OUTPUT (STANDBY) 6 7 8 9 10
1 2 3 4 5
TRIGGER
LED
POWER ON LED
NEG1 NEG2 NEG3 NEG4 NEG5
TRIGGER
NC C NO NC C NO DRY OUTPUT POWER FAIL
- INPUT +
LINQ2 Module (T2CVK33F10Q)
Altronix - eFlow6NB
Altronix - eFlow6NB
Altronix
MOM5
Altronix
MOM5
CDVI - A22K/A22NB/ADH10
RJ45 Jack
CDVI - A22K/A22NB/ADH10
RJ45 Jack
CDVI - A22K/A22NB/ADH10
RJ45 Jack
CDVI - A22K/A22NB/ADH10
RJ45 Jack
CDVI - A22K/A22NB/ADH10
RJ45 Jack
Fig. 4
Spacer
CDVI - A22K/A22NB /ADH10
Access Controller
Backplane
Fig. 4a
Plastic Spacer
pre-mounted into
CDVI Atrium modules
Insert into
TCV2 backplane
Fig. 4b