Altronix is not responsible for any typographical errors. Product specifications are subject to change without notice.
140 58th Street, Brooklyn, New York 11220 USA, 718-567-8181, fax: 718-567-9056
website: www.altronix.com, e-mail: [email protected], Lifetime Warranty, Made in U.S.A.
IISMP3E - Rev. 110606
H19J
MEMBER
+ DC --
+ BAT --
XFMR
AC
DC
SW1
SW2
6 V
12 V
24 V
SW1
ON
OFF
OFF
SW2
OFF
OFF
ON
LED Diagnostics:
Terminal Identification:
STEP 1: Use these holes to mount SMP3 by
pushing the nylon circuit board fasteners
(Fig. 1)
through the back of the
enclosure. Nylon fasteners will snap into place.
(Fig. 1)
Nylon Fastener
STEP 2: Mount SMP3 circuit board to nylon fasteners
by pressing down circuit board onto nylon fasteners.
Note:
Springlock on fasteners is used to remove
SMP3 circuit board.
Note:
Four (4) fasteners are provided in the SMP3 carton.
Springlock
Red (DC)
Green (AC)
Power Suppy Status
ON
ON
Normal operating condition.
ON
OFF
Loss of AC, Stand-by battery supplying power.
OFF
ON
No DC output. Short circuit or thermal overload condition.
OFF
OFF
No DC output. Loss of AC. Discharged or no battery present.
Terminal Legend Function/Description
XFMR
Low voltage AC input
(refer to Voltage Output/Transformer Selection Table).
+ DC –
6VDC, 12VDC or 24VDC @ 2.5 amp continuous output.
+ BAT –
Stand-by battery connections. Maximum charge rate 300mA.
Enclosure Dimensions:
8.5”H x 7.5” W x 3.5” D
