Altronix Maximal11FE, Руководство по установке

Страница: 8 / 12

- 8 - MaximalFEV Expandable Power Systems
NC C NO NC C NO
AC FAIL BAT FAIL
TRIGGER
AC DC AC1
EOL NO GND
SUPERVISED RESET
+AUX-
- BAT
+
- DC
+
L G N
1 min enable
2 hr disable
OFF - 24V ON - 12V
ON
NC C NO NC C NO
AC FAIL BAT FAIL
TRIGGER
AC DC AC1
EOL NO GND
SUPERVISED RESET
+AUX-
- BAT
+
- DC
+
L G N
1 min enable
2 hr disable
OFF - 24V ON - 12V
ON
Optional Rechargeable
Stand-by Battery
CAUTION: When power supply board is set for 12VDC
use only one (1) 12VDC stand-by battery.
Connect red battery lead to
the terminal marked [+ BAT]
and to the [positive (+)]
terminal of the battery.
Connect black battery lead to
terminal marked [BAT –]
and to the [negative (–)]
terminal of the battery.
Optional Rechargeable
Stand-by Battery
Optional Rechargeable
Stand-by Battery
- BAT +
Input 220VAC
50/60Hz
Line Neutral
Line Neutral
Tamper Switch
Keep power-limited wiring separate from non power-limited. Use minimum 0.25” spacing.
Up to four (4) 12AH rechargeable batteries are the largest batteries that can fit in this enclosure.
A UL Listed external battery enclosure must be used if using the 40AH or 65AH batteries.
Ground Lug
Fig. 2
Fig. 2a
Edge of
Enclosure
to Access Control Panel
or U.L. Listed
Reporting Device
Enclosure
Honeywell
Model 112
Tamper Switch
or equivalent
(Not Included)