Altronix Maximal, Руководство по установке

Страница: 12 / 16

- 12 - Maximal11FV / Maximal33FV / Maximal55FV / Maximal77FV / Maximal75FV Access Power Controllers (Fused)
Fig. 7 Normally Open: Non-Latching FACP
trigger input:
Fig. 6 Polarity reversal input from FACP
signaling circuit output (polarity is
referenced in alarm condition):
Fig. 5 Optional hook-up using two (2) isolated
power supply inputs (Only applicable on
Maximal11FV):
FACP Hook-Up Diagrams:
J2 J1
CUT JUMPERS
J1 AND J2
ISOLATED POWER INPUT
12 OR 24 VAC OR VDC
(LOCK POWER)
ISOLATED POWER INPUT
12 OR 24 VAC OR VDC
(ACM8 POWER)
CUT
JUMPER
FROM FACP
OUTPUT
CIRCUIT
+
--
FACP
OUTPUT EOL
TRG
FACP
NO C NC
FACP INTERFACE
JUMPER
N.C. DRY
TRIGGER
INPUT
TRG
NO C NC
FACP INTERFACE
FACP
N.C. TRIGGER
INPUT
N.C. RESET
SWITCH
JUMPER
TRG
FACP
N.O. TRIGGER
INPUT
TRG
FACP
NO C NC
FACP INTERFACE
N.C. RESET
SWITCH
N.O.
TRIGGER
INPUT
JUMPER
TRG
NO C NC
FACP
Fig. 8 Normally Open FACP Latching trigger
input with reset:
Fig. 9 Normally Closed: Non-Latching FACP
trigger input:
Fig. 10 Normally Closed: Latching FACP trigger
input with reset: