- 2 -
HubWayLD Active Unit
Overview:
Altronix HubWayLD8CD/LD16CD Active UTP Transceiver Hubs with Integral Camera Power transmits UTP video,
RS422/RS485 data and power over a single CAT-5 or higher structured cable. Units provides 8 or 16 camera channels in
a space saving 1U EIA 19” rack mount chassis which may be rack, wall or shelf mounted. Video transmission range is
up to 3000 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv, HubWayAv2, HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit features individu-
ally selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional HubSat4D Passive UTP
Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras
over a single CAT-5 or higher structured cable back to the HubWayLD8CD/LD16CD. In addition, the HubSat4D provides
power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to all local codes.
HubWayLD Specifica tions:
HubWayLD82CD
• HubWayLD8CD with eight (8) UL Listed Accessory
HubWayAv Video Balun/Combiners for 24VAC
Cameras.
HubWayLD83CD
• HubWayLD8CD with eight (8) UL Listed Accessory
HubWayDv Video Balun/Combiners for 12VDC
Cameras.
HubWayLD162CD
• HubWayLD16CD with sixteen (16) UL Listed Accessory
HubWayAv Video Balun/Combiners for 24VAC
Cameras.
HubWayLD163CD
• HubWayLD16CD with sixteen (16) UL Listed Accessory
HubWayDv Video Balun/Combiners for 12VDC
Cameras.
Agency Listings:
• UL Listed for Commercial CCTV Equipment (UL 2044).
CUL Listed - CSA Standard C22.2 No.1-04, Audio,
Video and Similar Equipment.
Data:
• RS422/RS485 data inputs.
Power:
• Individually selectable 24VAC or 28VAC power outputs
with OFF position.
• PTC protected output are rated @ 1 amp per channel.
• Surge suppression.
Visual Indicators:
• Individual video signal LED indicators.
• Individual power LED indicators.
Features:
• Picture and Gain control.
• Illuminated master power disconnect circuit breaker
with manual reset.
• IEC 320 - 3-wire grounded line cord (detachable).
• Unit can be rack, wall or shelf mounted.
• 1U rack mount chassis for use in standard EIA 19” rack.
Accessories:
• Video Balun/Combiners:
- HubWayAv - for use with 24VAC cameras.
- HubWayAv2 - for use with 24VAC cameras.
- HubWayDv - for use with 12VDC cameras.
- HubWayDvi - for use with non-isolated 12VDC cameras.
• Optional HubSat4D allows transmission of up to
four (4) video signals over a single CAT-5 or higher
structured cable.
HubWayLD8CD/LD82CD/LD83CD
Input:
• 115VAC 60Hz, 1.5 amp.
Video:
• Eight (8) channels of video over twisted pair up to
a distance of 3000 ft. per channel.
• Eight (8) 75 ohm video outputs.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 5 amp (150VA) maximum current.
HubWayLD16CD/LD162CD/LD163CD
Input:
• 115VAC 60Hz, 3 amp.
Video:
• Sixteen (16) channels of video over twisted pair up to
a distance of 3000 ft. per channel.
• Sixteen (16) 75 ohm video outputs.
Power:
• Unit provides up to 1 amp max. per channel not to
exceed a total of 10 amp (300VA) maximum current.
Common Specifica tions:
Additional Models:
