eFlow3NV Series Installation Guide
- 7 -
Battery
Connection
Battery & AC
Supervision Circuit
PD4/
PD4CB
J1
AC Delay
NC C NO NC
C NO
AC FAIL
BAT FAIL
TRIGGER
AC
DC
AC1
EOL
NO
GN
D
SUPERVISED
RESET
+AUX-
- BAT +
- DC +
L G
N
OFF - 24V
ON - 12V
ON
1P 1N 2P 2N 3P 3N 4P 4N
P
N
Ground
Lug
220VAC
power mains
DC Output
to
Devices
(refer to
Fig. 3a or 3b
for board
configuration,
pg. 6)
Optional Rechargeable
Stand-by Battery
Optional Rechargeable
Stand-by Battery
CAUTION: When power supply board is set for 12VDC use only one (1) 12VDC stand-by battery.
Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing.
7AH Rechargeable batteries are the largest batteries that can fit in this enclosure.
A UL Listed external battery enclosure must be used if using 12AH, 40AH or 65AH batteries.
Switch Detail
ON
1
Switch On - 12V
Switch Off - 24V
Fig. 4 -
eFlow3NV Configuration
Tamper Switch
(included)
To Access Control Panel or
UL Listed Reporting Device
Edge of
Enclosure
Enclosure
