eFlow104NV Series
- 9 -
Fig. 7 - eFlow104NXV configuration
Door
Wire Strap
(from
Enclosure
to Door)
Battery and AC
Supervision Circuit
L
G
N
NC
C
NO
NC
C
NO
BAT FAIL
AC FAIL
---
DC
+
AC
AC1
DC
---
BA
T
+
– AUX +
TRIGGER EOL
SUPERVISED
5A 250V
RESET
GND NO
disable
enable
2 hr.
1 min.
AC DEL
AY
SHUTDOW
N
O
N
220VAC
power mains
Battery
connections
Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing.
12AH Rechargeable batteries are the largest batteries that can fit in this enclosure.
An external battery enclosure must be used if using the 40AH or 65AH batteries.
DC Output to devices*
(refer to Fig. 3a, 3b
for board configuration pg. 6)
PD8/PD8CB
DC Output to devices*
(refer to Fig. 3a, 3b
for board configuration pg. 6)
PD8/PD8CB
Optional Rechargeable
Stand-by Battery
Optional Rechargeable
Stand-by Battery
Ground
Lug
* Outputs are non power-limited:
eFlow104NXV, eFlow104NX8V, eFlow104NX16V.
Outputs are power-limited: eFlow104NX8DV, eFlow104NX16DV.
Edge of
Enclosure
to Access Control
Panel or
U.L. Listed
Reporting
Device
Enclosure
Tamper Switch
(Not Included)
