Altronix eFLOW eFlow104NKA8D Series, Руководство по установке

Страница: 10 / 12

- 10 - eFlow104NK8(D)QP Installation Guide
Once the Certificate and Key is uploaded successfully you can proceed with setting up HTTPS in Network Settings.
A. HTTPS Port: Enter the HTTPS port number assigned to the LINQ8PD(CB) module by the network
administrator to allow remote access and monitoring. The default inbound port setting is 443.
Being encrypted and more secure, HTTPS is highly recommended for remote access.
B. Click the button labeled Submit Network Settings .
A dialog box will display “New network settings will take effect after the server is rebooted”. Click OK .
Browser Setup:
When not using the Altronix Dashboard USB connection for the initial Network setup the LINQ8PD(CB) needs to
be connected to any DC power supply(ies) or eFlow power supply(ies) being monitored prior to programing.
Factory Default settings
• IP Address: 192.168.168.168
• User Name: admin
• Password: admin
1. Set the static IP address for the laptop to be used for programming to the same network IP address as the
LINQ8PD(CB), i.e. 192.168.168.200 (default address of the LINQ8PD(CB) is 192.168.168.168).
2. Connect one end of the network cable to the network jack on the LINQ8PD(CB) and the other to the network
connection of the laptop.
3. Open a browser on the computer and enter “192.168.168.168” into the address bar.
A dialog box Authentication Required will appear requesting both user name and password.
Enter the default values here. Click on the button labeled Log In .
4. The status page of the LINQ8PD(CB) will appear. This page displays the real time status and health of each
power supply connected to the LINQ8PD(CB).