Altronix ALTV2432220, Инструкции по установке

Страница: 2 / 8

- 2 - ALTV2432220 Series
Overview:
Altronix ALTV2432220 Series CCTV Power Supplies provide 24VAC or 28VAC distributed via thirty-two (32)
fuse or PTC protected outputs for powering CCTV cameras, heaters and other video accessories.
Thirty-Two (32) Output ALTV2432220 Reference Chart:
Altronix
Model Number Output
Voltage
Total
Output
Current
(Power) Number of Outputs PTC Protected Outputs (auto-resettable) Fuse Protected Outputs Output Current (max per output) 220VAC 50/60Hz Input Current
ALTV2432220
24VAC 8A
32
–
P
3.5A
1.5A
28VAC 7A
ALTV2432CB220
24VAC 8A
P
– 2.5A
28VAC 7A
ALTV2432350220
24VAC 14A
–
P
3.5A
28VAC 12.5A
ALTV2432350CB220
24VAC 14A
P
– 2.5A
28VAC 12.5A
ALTV2432600220
24VAC 28A
–
P
3.5A
3A
28VAC 25A
ALTV2432600CB220
24VAC 28A
P
– 2.5A
28VAC 25A
Specifications:
Installation Instructions:
1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes
in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place
the enclosure’s upper keyholes over the two upper screws; level and secure. Mark the position of the lower
two holes. Remove the enclosure. Drill the lower holes and install the fasteners. Place the enclosure’s upper
keyholes over the two upper screws. Install the two lower screws and make sure to tighten all screws
(Enclosure Dimensions, pg. 8). Secure enclosure to earth ground.
2. Turn main switch on the unit OFF (Figs. 1-3, pgs. 4-6).
3. All units are factory set for 24VAC operation.
For 28VAC operation, adjust unit prior to mounting and applying power as follows:
Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and the
yellow wire [24V] is connected to the terminal marked [S].
4. Connect unswitched AC circuit (220VAC, 50/60Hz) as follows: Green branch wire (ground) connects to
the terminal marked , Line connects to the terminal marked [L], and Neutral connects to the terminal
marked [N] of the Inlet Appliance Connector. (Figs. 1-5, pgs. 4-6).
Use 18 AWG or larger for all power connections.
5. Turn main switch on the unit to the ON (RESET) position (Figs. 1-3, pgs. 4-6).
6. Measure output voltage before connecting devices. This helps avoiding potential damage.
CAUTION: Determine the maximum operating voltage of the equipment being powered before adjusting
the output voltage.
Agency Listing:
• CE European Conformity.
Input:
• 220VAC, 50/60Hz.
Output:
• Thirty-two (32) fuse or PTC protected outputs.
• 24VAC or 28VAC supply current.
• Outputs are rated @ 3.5A (fused) or 2.5A (PTC).
• Surge suppression.
Features:
• Secondary fuse rated @ 10A/250V.
• AC power LED.
• Power ON/OFF switch.
• Spare fuses provided.
(all models w/primary and/or secondary fuses).
Enclosure Dimensions:
13.5” x 13” x 3.25”
(342.9mm x 330.2mm x 82.6mm).
Illuminated
Power Switch
PTCs
used on
ALTV2432CB220
Input 220VAC,
50/60Hz, 1.5A
4A
250V
N
PD16W
XFMR INPUT
SP
P
N
3 1 2 4 5 6 7 8
PROTECTED
OUTPUTS
OUTPUTS
COMMON
11 10 9 12 13
P
16 15 14
N
3.5A 250V
N
PD16W
XFMR INPUT
SP
P
N
3 1 2 4 5 6 7 8
PROTECTED
OUTPUTS
OUTPUTS
COMMON
11 10 9 12 13
P
16 15 14
N
3.5A 250V